How to Dim Your Spider LEDs 3-8 & X

All Spider models come with the ability to have the LEDs on both the spiders and keypads dimmed.

How to Dim the Keypad and Spider X LEDs

The Spider X and keypad have LEDs that can be dimmed through the new Spidertracks App. Please make sure you have the latest version of the App from either the IOS or Google Play Store.

            

1. Open the App.

2. Log in with the details that you used to sign up with.

3. Tap More.

4. Tap Spider Connection.

5. Adjust the LED Brightness to your desired preference for both the keypad and Spider X.

The Spider X max LED Brightness to minimum LED Brightness turns both lights on the device off.  

Where as the keypad will still be very dimly lit at minimum brightness.

***

How to Dim the Spider and Keypads Models 3-8

If you have upgraded to the latest version of Spider firmware, you will be able to dim the LEDs on the keypad of your Spider by pressing and holding the Mark button. After one second the LEDs will start dimming, and will dim down and then light up again.

• Spider 3
• Spider 5
• Spider 6

The following Spiders using an external keypad, however pressing and holding the Mark button will cycle the Spider LEDs.

• Spider 4
• Spider 7
• Spider 8

Release the Mark button at the desired brightness applies to all Spiders. The LED brightness is reset every time the power is cycled on the Spider.

If you have any trouble or if you for any other questions, please contact [e-mail]